How To Ride A Dirt Bike With Clutch

How To Ride A Dirt Bike With Clutch

Many dirt bike experts are already acquainted with the clutch system in driving a manual car. The good thing is that the dirt bike also uses a clutch to shift the ride. But there is a big difference between a car’s clutch and a dirt bike. Here you will learn how to ride a dirt bike with clutch.

It works completely differently and poses a challenge in understanding its changing aspects. It is always good to understand the dynamics of your dirt bike if you don’t want to mess up with the overall gear setup and want to enjoy the ride. Before you start using it on the road, it is better to understand the gear shifting procedure to get complete control over its speed, acceleration, and gear options.

How To Ride A Dirt Bike With Clutch?

If you are a beginner, here are the best steps to riding a dirt bike using clutch.

1. Learning The Controls

Learning the controls is a necessity for any rider, and it should be one of the value points you should learn before even turning on your bike. You never need to turn the bike on and simply hit the accelerator when you do not know where the brakes are.

All you need to know where the gear shifter is placed on the left side near the footpeg, the clutch is placed on the left side of the handlebars, the accelerator is on the right side of the handlebars, and the front brake is on the right side of the handlebars over the accelerator, and the rear brake is the right side near the other footpeg. Keep in mind one thing do not just get on a bike if you are unfamiliar with the controls to avoid any mistakes.

2. Neutralizing The Bike

A dirt bike may get on track while in gear, but that is not suggested, particularly for beginners. To do so, you need to pull and grip the clutch lever. Now drive the shift pedal and slowly start pulling up the clutch pedal. Keep on doing this until you witness a click. This will guarantee that your bike is in a neutral situation.

3. Kick Starting

Kickstarting is diverse between a 2 stroke and a 4-stroke dirt bike. On the right side of the engine, you will notice a large pedal coming out of the engine. This is the kick lever. Put your foot over the kick pedal and kick it down gradually.

How To Ride A Dirt Bike With Clutch

4. Using The Clutch

The clutch is the part of your bike that issues the power from the engine to the gears. You will use your clutch when trying to shift gears or when you need to make your dirt bike to a stop therefore that your engine does not stand when it is not in gear. To use the clutch, you will lack to pull the clutch lever endlessly it touches the handlebars. The clutch will feel more relaxed to pull in. Do not be too hard on yourself if your bike stalls a lot when you are first learning.

5. Shifting And Braking

Unprofessional bikers trust that you need to pull in the clutch whenever you press the brake, but you just need to do so if you are swapping gears or going on to a full stop. Suppose you press the brake in so that you slow down and you are going to unhurried for the chosen gear you may need to shift down to a lower gear. Your front brake should not notice anything like your clutch. It should be snugger. Try to relate them so that you may get aware of the differences.

6. How To Shift Gears On A Dirt Bike

Step in unbiased, take off, place yourself in the front gear you will endure in the clutch, and push down on the gear shift with your left foot. Then release the clutch a little bit till you start to roll, and that is when you will give it some accelerator. Once you start to catch additional speed, you pull the clutch in gain and push up with your left foot into second gear, third, fourth, and so on. You will have to get the sweet spot of the clutch to shift simply, or else your trip can be very erratic.

Practice:

Previously trying to learn jumps, guiles etc. You need to master the clutch and shifting gears. It is not a proposed practice on trail biking but rather a clear area similar to a straight, off-road lane is a great area to ride up and down on. Drilling in an area with no hurdles will allow you to get lots of practice, and you will get to emphasize exactly using the clutch. Furthermore, there are semi-automatic delivery dirt bikes that you could learn to ride before even learning about ever-changing gears or using a clutch.

How To Ride A Dirt Bike With Clutch

7. Get On And Ride

Once you are contented with the idea of the clutch works, the gear case at your left foot moves by the gears, and where everything is, you should sense much more persuaded than when you began. Training makes exceptional learning the controls of a motorcycle; therefore, be confident you set apart time to get the repetition in. After that, it should feel like second nature to you.

Conclusion

Riding a bike with a clutch may look pretty like a trial when you first hike on the bike and kick it into life. Once you have caught up the bike 5 to 6 times trying to pull off in first gear, you may be attracted to call it a day and skill your manual dirt bike on an involuntary transmission dirt bike.

A little time and perseverance will go a long way to get you riding and shifting gears efficiently on your dirt bike. The key to your smooth shifting method is practice, and you can easily begin your mastery of this skill and be well on your way to making good improvements.

Leave a Reply