Why And When You Should Change Your Dirt Bike Helmet?

Dirt Bike Helmet

Author’s Top Picks

Westt Cross X Motocross Unisex Helmet with Dual Visor Check Price
ILM 606V Off Road Motorcycle Dual Sport Helmet Check Price

Do you know why and when you should change your dirt bike helmet? This post will explain everything.

Dirt biking, no matter how entertaining or exciting, is eventually a fairly hazardous workout. Riding bikes of insignificant weight at high speeds over dirt paths sounds cool, but it’s risky. One of the most shared damages that can happen comprises a head injury. To guard yourself against them, a dirt bike helmet is essential. A dirt bike helmet does not come low-priced and is typically preserved as a valuable product by dirt bikers. No problem, how exclusive they are.

Dirt bike helmets have a lifetime and must be altered after a particular time. The amount of time generally suggested for varying your dirt bike helmet is 3-5 years after use or 7 years since the invention of the helmet. Though, if you are part of a smash and withstand damage to your helmet, you should change it instantly.

Let’s have a guise at what goes overdue the verdict of altering your dirt bike helmet.

Producers Suggested Replacement Time

Dirt bike helmets come in numerous brands and dissimilar builders. This states that they have diverse replacement phases because every helmet brand is intended only way. That is why dirt bike helmet producers have changed time stages before exchanging them. Take a look at what some well-known producers have to say about the suggested period for replacement of their dirt bike helmet brands:

O’Neal: Seemingly, O’Neal doesn’t deliver any info concerning the time period you are thought to swap your helmet. The privilege is to use resources without danger of crumbling or floating down, irrespective of the time the helmets are in use. But in a period of five years after buying their helmets, the spare parts are generally tough to find. So, five years is really the suitable period of time to think of doing a spare of your dirt bike helmet if it is a brand from O’Neal.

Fly: Fly endorse that you should swap their helmets after using them for five years from the time of their construction. The chief reason for doing so is that the EPS foam located inside the helmet starts to get stiffer, and with time it makes the helmet flabby for use. But, most pointedly, Fly commends that you need to change your dirt bike helmet directly after a bang.

Fox: Like Fly, Fox also endorses that you should alter your helmet after five concrete years of use. This builder holds that after five years, you should not hesitate to change your helmet no matter how extended these brands of helmets have been in construction. Likewise, they propose that you need to do a helmet spare after a solid bang irrespective of apparent injury both in the private and outdoor share of your helmet.

Bell: Contrasting the other builders, Bell proposes that you need to change your dirt bike helmet after three years of use. In addition, Bell guides swap your helmet after a very hard smash.

Troy Lee Designs: Much like Bell, Troy Lee Designs proposes that dirt bike helmets should be changed three years from the time of built-up. Better still, they endorse doing a replacement after a calamity or any clang that may have produced some injuries yet negligible they may look. Even though there are other builders, the five debated above were nominated contingent on their admiration. In case you are using a helmet from other builders other than these five, it is an excellent impression to exchange your helmet builder to know when you can have your dirt bike helmet exchanged.

best Dirt Bike Helmet

Should You Change A Helmet After A Bang?

This is a more complex query than the subject of the ending date. Some builders, such as Fox, were told to change a helmet after any grave bang even if the helmet showed no symbols of injury. Other creators said that most helmets are okay after a smash and to only change it if the polystyrene has any lenient spots or curves. Dirt bike helmets are intended to be one-time-impact defensive gear. The foam that engrosses the knock-back is planned to crush under pressure, but the material does not recover. So, once a part is crinkled, it will not guard the rider on ensuing bangs. The only exclusion would be the rare dirt bike helmets that use EPP foam.

Take off the internal liner of the helmet to examine the polystyrene. If there are any swells, trodden areas, bangs, or evident damage to this share of the helmet, then it openly should be swapped. You can use a gauging tape to mount the foam thickness on different edges of the helmet to categorize any crushed areas. Next, review the exterior shell of the helmet. This part of the helmet spreads the influence across the polystyrene foam, defends the foam from injury, and keeps the helmet together during a bang. Finally, confirm there are no rings or bangs in the shell. If there are dings or pops on the shell, there will surely be harmful to the material underneath.

Check the outdoor of the helmet for waning. If the helmet looks distressed, there is a good chance the plastic has become complex, and it may not keep the helmet together in the event of a bang. Check the production date label and reflect how long you’ve been expending the helmet. Call the helmet builder and see if they check helmets for free. Many of them will tell you if the helmet wants to be changed.

Also Read: Best Dirt Bike For Wheelie.

Why And When You Should Change Your Dirt Bike Helmet

When Not To Change Your Dirt Bike Helmet?

As stated, a dirt bike helmet does not come inexpensive. However, it’s a chief investment you want to keep with you for as long as possible. The word possible describes when you should not replace your dirt bike helmet.

Changing your dirt bike helmet is unnecessary when its chosen life period hasn’t run out. Some producers guide replacement or change a few years after the helmet’s construction. Other producers advise that a few years after you start to use the helmet. Either way, the helmet does have an end date, and you should not replace it before that termination date comes along, but for an actual condition.

One situation in which almost all of the builders solidly direct you to change your helmet occurs to be the case of a bang. Dirt bike helmets are there to defend you from bangs. Though, if you do have to need them in case of a bang, you can be sure that your helmet will endure damage. Usually, this damage is visible and can be seen on either the interior or the exterior of the dirt bike helmet.

However, a lot of times, the damage isn’t even visible to the naked eye. It could have occurred to the foam inside, and you might not even notice. Any damage to the padding or the foam puts your head at risk whenever you go out and ride again. Hence, do not end up changing your helmet before the expiration period unless you happen to get into a crash.

Finally, another situation that may arise happens to be the lack of replacement parts for helmets. Manufacturers update their designs every few years, and you may not find replacement parts for your old helmet after some time. Therefore, until you run out of parts and can’t find them, there is no real need to replace your dirt bike helmet.

When To Replace Your Helmet?

As previously pointed out, different manufacturers happen to have different expiration periods for their products. Some manufacturers suggest that their products need to be replaced after a certain period of time passes since the built-up date. Others propose an end period that starts once you start using the helmet. In either case, you should tail the chosen expiration period and change your helmet once that period passes.

On the other hand, almost every single builder proposes changing their products after a bang. A crash on your dirt bike typically puts your helmet into use, and though the helmet will defend you, it will invite harm. The harm that a dirt bike helmet invites in a smash might not be noticeable, but it’s something that all producers trust cannot be endangered. Therefore, all dirt bikers must swap their helmet after a smash.

One more condition that permits a helmet replacement is when you run out of replacement parts. Unfortunately, helmet enterprises are continually rationalized, and old schemes are generally fully scuffled. So, replace your dirt bike helmets when you can no longer find replacement parts for them.

Dirt Bike Helmets

How To Examine Your Helmet?

To change your helmet, you need to check if it’s injured or not. To do so, regular checkups are a need. Besides, you need to review your helmet after every bang and every time your helmet occurs to fall. Here’s how you should examine your helmet:

  • Check Exterior: Check the outside, particularly the top, to see if there is any destruction on top.
  • Check Inside: Check the exclusive of the helmet to look for any place where the foam might be getting feeble, or the casing fabric may be dithering. In the latter case, the foam is bare to the air and becomes stiff.
  • Check Foam Density: Lane your hand on the inside of the helmet and check each of it to look for any area where the foam thickness might not be usual. The foam desires to be decisively crowded in all spaces.
  • Check All Straps And Pads: Every solo wad and band must be integral and free from injury. No one desires their helmets to slip off while they are riding.

Should You Change Your Helmet After Dropping It?

You might ponder that helmet harm can happen anytime, such as when dripping. However, that is not generally the situation. A dirt bike bang occurs at great speed and sends you dashing down at great speed and a lot of force. That’s how it suffers such main injury.

Dropping your helmet generally won’t injure it like that. A helmet is robust, and just having it drop to the ground hardly damages it. Though, if you drop it hard or from an irregular altitude, you should examine it just in case.

How To Keep Your Helmet In Inordinate Form?

To give yourself the appropriate safety, you must ensure that your helmet stays in inordinate shape. To ensure it does, you must review it and uphold it continually. Like every other object, upkeep is needed for a dirt bike helmet. So, you can only use it habitually if you uphold it correctly.

dirt bike injury

How To Uphold Your Dirt Bike Helmet?

Upholding your dirt bike helmet requires you to prioritize definite things in order. Therefore, you must follow the procedure each time you go for dirt bike helmet upkeep. The procedure generally directed for helmet upkeep goes like this:

  • Clean It: Carefully clean each and every share of your helmet. This comprises the external, private, and everything else you discover on your helmet.
  • Refinement The Outer Covering: The external shell is either made of plastic or metallic. Refining both not only makes them look good but also cleans them up of any unsolicited resources.
  • Take Care of the Plastic Parts: Check if all the plastic shares are complete. Repair them if they are slack and swap them if they are fractured.
  • Relief And EPS Liners: Both linings keep the EPS foam complete and defend it from injury. So apply them to keep the defense to your head intact.

Bottom Line

I am the vocal sound behind this website. This site is rising to be a principal source for dirt bike riders that are just beginning or are at the intermediary level. I put together a lot of responses to queries I also had a long time ago. Expectantly, it will be beneficial to you as well. If it is, give pleasure to giving thumbs up at the end of the article you are reading. Thank you!

Highly Recommended Products

Senhill Motocross Dirt Bike Unisex Helmet Check Price
Shoei VFX-EVO Helmet – Allegiant (Large) Check Price
509 Altitude Helmet with Fidlock (Wildcard Chrome – 2X-Large) Check Price
GLX GX23 Dirt Bike Full Face Helmet Check Price
Fox Racing Prix Men’s V1 Off-Road Motorcycle Helmet Check Price

Leave a Reply